Home > Alle Kategorien > Werkzeug > Mess- & Analyse-Instrumente > Elektrische Instrumente >


Multimeter UNI-T UT107 LCD Automotive Handheld Multimeter AC/DC voltmeter Tester Meters with DWELL,RPM,Battery Check

0.0 (1 Stimmen) speichern: bestsav1 Store
US $0.65 - 67.99
US $1.16 - 121.41 -44%


Geld-Zurück-Garantie Rückerstattung in 15 Tagen

Überprüfung durch Cxxxi (BR)
The product have good quality and arrived in good conditions. The package protects well the product. I did not test whole functions to see that them works correctly, but the that i tried works fine. The product comes without a protection bag but i don't remember if was announced with it. I recomend the seller.


  • Markenname: UNI-T
  • heimwerkerbedarf: Elektrisch
  • Darstellungsart: Digital Display
  • Messende Induktanz-Strecke: None
  • Betriebstemperatur: 0- 50 ℃
  • Maße: 180mm x 87mm x 47mm
  • Modellnummer: UT109
  • Messende Widerstand-Strecke: 400/4K/40K/400K/4M/40M
  • Messende Kapazitanz-Strecke: 10nF/100nF/1000nF/10uF/100uF
  • Betriebsart: Auto Range
  • AC Spannung: 4V/40V/400V/1000V
  • DC Spannung: 40mV/400mV/4V/40V/400V/1000V
  • Wechselstrom: 400uA/4000uA/40mA/400mA/4A/10A
  • DC Strom: 400uA/4000uA/40mA/400mA/4A/10A
  • Display Count: 4000
  • Features 1: Auto Range
  • Features 2: Diode
  • Features 3: USB/RS-232 Interface
  • Features 4: Continuity Buzzer
  • Features 5: Low Battery Indication
  • Features 6: Data Hold
  • Features 7: MAX/MIN
  • Features 8: Dwell: 4CYL/6CYL/8CYL
  • Features 9: Tach: 4CYL/6CYL/8CYL






Diagnose Automobile troubles:
1. Fuse Testing:  Check the fuse to see if it is blown out.

2. Switch Testing:  Check the switch to see if it can work correctly
3. Solenoid or Relay Testing
4. Starting/Charging System Testing
5. Battery Power Consumption Testing when the Engine Is off
6. Trigger Voltage Battery Load Testing---Upon the start of the engine, test the battery to see if it can offer an adequate voltage
7. Voltage Drop Testing---Test the voltage drops caused by the switch, cable,solenoid or connector.  Any abnormal voltage drop generally results from an additional resistance.  The resistance will restrict the currents upon the start of the engine, leading to the reduction of the load voltage of the battery and the slow-down of the start of the engine.
8. Charging System Voltage Testing---This testing is used to see if the charging system operates normally so as to provide the electronic systems with adequate power (lamps, electric fans, radio sets, etc.).
9. Ignition System Testing
A . Ignition Coil Testing
B.   Ignition System High-Voltage Damper Testing
C.  Hall Switch/Sensor Testing
D.  Magnetic Resistance Sensor
E.  RPMx10 Testing
F.   Fuel System Testing

10. Engine Sensor Testing
A.  Oxygen Sensor
B.  Temperature sensor
C.  Position Sensor
D.  Absolute Pressure (MAP) and Baro Sensor
E.  Mass Air Flow (MAF) Sensor


Basic Functions Range Best Accuracy
DC Voltage 200mV/2V/20V/1000V (0.5%+2)
AC Voltage 200V/750V (0.8%+5)
DC Current 200mA/10A (0.8%+5)
Resistance 200W/2kW/20kW/200kW/20MW (0.8%+5)
Temperature (°C) -40°C~1000°C (2%+8)
Frequency 2kHz (2%+5)
Duty Cycle 1%~90% (4%+5)
Special Functions    
Fused 10A Range          
Battery Test 12V (3%+5)
Dwell 4Cyl/6Cyl/8Cyl (3%+5)
Tach 4Cyl/6Cyl/8Cyl (3%+5)
Continuity Buzzer          
Data Hold          
Low Battery Display          
Input Impedance for DC
Voltage Measurement
Around 10MW  
Max. Display 1999  


Power 9V Battery (6F22)   not included
LCD Size 60 x 54mm
Product Colour Red Meter and Grey Holster
Product Net Weight 352g (Including Holster)
Product Size 179 x 88 x 39mm
Standard Accessories Test Lead, Battery, Manual, Holster, Point Contact Temperature Probe
 Note:This products didn't contain the Batteries because of the AirPlane Limits.

 Hope you can understand!Thanks!

  • 5 Sterne 82%
  • 4 Sterne 11%
  • 3 Sterne 5%
  • 2 Sterne 0%
  • 1 Stella 2%
4.7 / 5

Alle ansehen 35 Bewertungen

Benutzer teilen (5)